Back to all

Protect your Label: The Different Types of Label Varnishes

A beautiful new label is the beacon your products need to showcase your brand and convince buyers to try your goods. Unfortunately, a damaged label can undo all the hard work you put into your packaging design. Thankfully, there are solutions like label varnishes to help you protect your investment.

As with lamination, there are multiple label varnishes available to not only help you protect your label as well as enhance your design. Each type of varnish can help you defend your label from scuffs, scratches, water damage, fading, and other threats, all while contributing to your preferred aesthetic.

Labels with a UV varnish.

Breaking Down Each Type of Label Varnish

While label lamination utilizes a layer of film to protect your label, varnishes operate a bit differently. Label varnishes are liquids that are rolled onto a label and then cured or dried so that the varnish adheres to the label materials’s surface. This method makes varnishes a good option for paper labels because the liquid can conform to the texture of the paper and fill in any nooks and crannies.

Like laminates, there are a few different types of label varnishes that differ based on the application process or their final appearance.

UV coating
Aqueous coatings
Gloss, satin, and soft-touch varnishes

UV coating

As the name suggests, UV coatings use ultraviolet light to cure a liquid coating made of a special mix of chemicals. Once it’s cured, the UV varnish essentially bakes onto your label material to create a protective coating. This newly cured shield basically acts as a permanent sunscreen, preventing your design from fading over time and other factors that can damage your label.

Aqueous coating

Like a UV coating, aqueous coatings use a special solution to protect your label. However, you don’t need UV light to cure aqueous varnishes. These solutions are a clear, water-based varnish that quickly air dry to seal off your label materials from potential danger.

Gloss, satin, and soft-touch varnishes

While UV and aqueous coatings differ in terms of the process used to cure them, gloss, sating, and soft-touch varnishes denote the finishing effect a coating has on your label. Gloss varnishes create a smooth, shiny look for your labels once applied. Satin varnishes – known as “matte” for laminates – cut out most of the shine to create a flat look that makes other design elements pop. Soft-touch varnishes not only look soft, they can even add a soft textural element to your labels as well.

Paper beer labels protected with a label varnish.

Protect and Enhance Your Labels with the Right Varnishes

No matter what type of product you sell, it’s well worth the investment to protect your labels. Scuffs and scrapes can happen to any product label, and once that ink comes off your label there’s not much you can do. Varnishes and laminates offer both protection and aesthetic improvements – it’s just a matter of finding the right one for your needs.

Fortunately, you don’t need to find and apply your own varnishes. At Blue Label, we can guide you through every step of the label process, including applying varnishes or laminates to protect and enhance your designs. In fact, we can even add a varnish on top of a laminate to highlight specific design elements. Every label is different, so we work with you to figure out the best ways to showcase your products.

Ready to invest in eye-catching labels built for success? Contact us today about printing your next batch of product labels.

Back to all

Pick Your Protection: The Different Types of Label Lamination

A good label allows your products to make a great first introduction to potential customers. However, scuffs, scratches, and other forms of damage can mangle your message without protection.

Label lamination allows you to add a protective film to the surface of your label. Once your label is printed, lamination serves as a second skin of sorts that shields your design from scratches and provides some waterproofing for your base material. However, these laminates can offer additional benefits depending on which type of lamination you use.

New labels going through the lamination process.

Breaking Down Each Type of Label Lamination

While laminates in general offer protective capabilities, certain types of lamination can add decorative effects to your label. This variety allows you to pick and choose different label laminates depending on your desired aesthetic. Other laminates can also change the feel of your label or provide certain capabilities not offered by other protection. In general, laminates are broken down into five types.

Gloss
Matte
Soft touch
Leather
Thermal transfer

Gloss

If you want your labels to shine, you’re going to like gloss laminates. These laminates reflect light off your label to add a smooth, glossy look that makes your design pop for passing customers.

Matte

If shiny isn’t your thing, a matte laminate creates a more subtle appearance for your labels. A matte finish dulls down your label surface so that it doesn’t shine much at all – but this means your label will be far from dull. These laminates can create a soft, subtle look that allows certain elements and colors appear deeper and brighter in contrast to the matte finish.

Soft touch

While matte finishes can make your labels look soft to the touch, other laminates can create a velvet-like, matte finish. Soft touch laminates add a tactile quality to your labels that consumers can feel. Research shows that the feel of a product can help sway buyers, which means that soft touch laminates can be a difference maker if you want that velvety aesthetic.

Leather

If you like the rugged, textured look of a paper label material but want the performance capabilities of a film, leather laminates help you achieve the best of both worlds. Leather laminates allow you to recreate weathered, wrinkled effect on film labels. This type of laminate works best on dark colors that allow you to highlight the texture of your label, all without the fuss of having to flood paper labels with ink or deal with potential durability issues.

A closeup of a leather label laminate.

Thermal transfer

Unlike other types of laminates, thermal transfer finishes are chosen more for what you plan to print on your labels in the future. These laminates allow you to use thermal printers to print on top of your labels whereas other lamination may prevent the ink from sticking. For example, a deli with a branded label may want to print the weight and price for each order on its labels. Thermal transfer laminates allow these types of businesses to do so, all while adding a gloss, matte, or some other type of look to their labels.

Invest in the Right Protective Film for Your Labels

Product labels come in so many different styles. No matter which aesthetic you prefer, it’s important to protect your label design from harm. To do so, you’ll need to figure out which form of protective film is best for your needs, whether it’s a laminate or some other option.

Label laminates typically adhere to film material better than paper, while varnishes conform to the nooks and crannies that can be found in paper materials. You can also add a varnish on top of a label laminate to really make certain design elements pop. There are so many possibilities to amp up your design and protect your label that it can be a bit overwhelming without some guidance.

Fortunately, a good lamination packaging company can help you weigh your options. At Blue Label, we work with you to identify the right details for your design, including label material selection and protection. Contact us today to invest in the right labels for your business.

Back to all

The Shelf Life of Labels: 6 Factors That Impact How Long Your Labels Last

Nothing lasts forever, and that includes your product labels. Even the most attractive packaging can lose its luster over time, whether it’s because of a preventable accident or an unavoidable change. Damaged or outdated labels won’t help your business, so it’s important to know the factors that can impact the lifespan of your labels so that you make sure you get the most out of your investment.

Sunlight

You may enjoy a sunny day, but long-term exposure to the sun is a problem for your labels. Ultraviolet rays break down the chemical bonds found in inks over time, which essentially has a bleaching effect. As a result, exposure to sunlight causes your label designs to fade.

While you can’t completely protect you labels from sunlight, you can delay its effects. Label laminates and UV coatings add a layer of protection that lessens the effect of sunlight, like how sunscreen shields skin. While fading will still occur over time, these solutions notably slow down the process so your labels stay vibrant for as long as possible.

Bottle labels protected from sunlight by a UV coating.

Water and Other Fluids

Paper labels don’t play well with water, which is a serious problem for any labels that are refrigerated, encounter water during the application process, or interact with any other slippery situations. Even paper stocks with higher wet strength will absorb water and other fluids over time. This can cause them to distort and even fall off eventually. For this reason, it’s strongly suggested to use film stocks and laminates for any labels that need some degree of water resistance.

Scuffs and Scratches

The quality of your product packaging says a lot about your goods. A big scratch or scuff on your labels won’t send the right message to potential customers. Instead of dealing with damage when it happens, there are ways to shield your labels from unwanted friction that can occurs during shipping and handling. Laminates and varnishes add a layer of protection so that your product labels can endure more wear and tear and customers pay attention to your branding instead of unsightly damage.

Adhesive Material

No company wants to get stuck with labels that don’t stick to its products. There are a variety of factors that can impact the long-term success of a label adhesive. Some adhesives are better suited for use with water, whether it’s for a product that’ll sit in a steamy bathroom or get submerged in a cooler full of ice. Sometimes the containers you use are better suited for a strong acrylic-based adhesive. No matter the environment, it’s important to work with a label expert who can identify which adhesive makes sense for your products.

Label Regulation Changes

Depending on your product, you’re not the only person who has a say in what goes on your label. Various government organizations have specific compliance standards for a wide range of products, covering everything from food and drink to beauty products and vape juice. These regulations can change over time, which means what were once completely compliant cannabis product labels could become obsolete after new legislation. As a result, it’s important to stay up to date on label compliance and to work with a label printing company that provides order flexibility.

Rebrands or Other Label Changes

Change isn’t always an unexpected development. At some point, you may decide that your business is due for a rebrand, or you may simply refresh your product label designs. In this case, you’ll need to transition from your old labels to new ones to show off your new logo, color scheme, or other design change you’ve made to the aesthetic of your packaging. Fortunately, you can plan for these changes and work with a printing company to have new, eye-catching labels ready when it’s time to update your labels.

Three variations of a product labels with different materials and varnishes.

Prepare for the Future with Long-Lasting, Durable Labels

Whether you need to guard your packaging or prepare for the unknown, it’s important to work with the right printing company to get the most out of your labels. Thanks to an investment in state-of the art digital label printing equipment and technology, Blue Label offers both protective label capabilities and order flexibility to help you prepare for long after your product labels go out to market.

If you need quality, cost-effective product labels that are made to last, we can help. Contact Blue Label today to talk to one of our experts about how we can help you get the most out of your durable labels.

Back to all

How to Protect Your Bottle Labels: Laminates vs. Varnishes

After making an investment in new bottle labels, the last thing you want is something to scratch them up or tarnish them. A damaged label is bad for your brand image, but there are ways that you can proactively protect your designs through label lamination and varnishes.

Do I Really Need a Protective Coating for My Bottle Labels?

There is no set rule that you must add a laminate or varnish to your custom bottle labels, but we strongly recommend that you do so. If you choose to go without any protective coating or lamination, you run the risk that something could scratch the ink or moisture could compromise your label, depending on the material of your label.

Without something to protect the ink, any form of friction could damage your design. For example, some distilleries decide against laminates or varnishes because it gives their paper bottle labels a rustic, unfinished look. When those bottles are shipped, they tend to rub up against the cardboard and other bottles. Those attractive labels won’t look nearly as good thanks to scuffs, scratches, and other preventable damage.

There are also other factors that can impact your label. Water and other liquids can wreak havoc on unprotected materials, which is especially problematic for certain bottles. Laminates and UV coatings can also protect ink from the sun and other outdoor elements.

A product label with a spot varnish.

What’s the Best Option to Protect My Bottle Label?

While laminates and varnishes both offer protective capabilities, they have some key differences that may make one a better option than the other for your packaging. In fact, there are ways that you can utilize both laminates and varnishes. The answer to which protective solution is right depends on a few factors.

How much label protection do you need?

Both options will help protect your label, but a laminate offers a greater level of protection than a varnish. A laminate is a separate film that adheres over top of your label, while a varnish is a clear resin that’s applied then cured. This means a laminate allows you to build additional layers of protection instead of reinforcing your existing material, which is good for bottles that may end up in a cooler or other potentially damaging environments.

Do you want to take advantage of decorative effects?

Of the two options, varnish offers you more decorative bang for your buck. There are various types of laminates, such as gloss, semigloss, and matte films, but varnish can help you enhance your design to a greater effect. A spot varnish can apply resin to a very specific part of your label, such as your logo or a specific element of your design to create contrast with the rest of the material. You can even apply a spot varnish on top of a laminate if you want to maximize protection and decoration.

Which label material will you use?

Your label material can play a part in your protection options. If you’re using a synthetic material like a BOPP or plastic-based material, we strongly recommend that you use a laminate. While paper naturally has a grit to it that allows ink to soak into the material, film facestocks are so smooth that the ink lays on top of the material. As a result, the extra layer provided by a laminate is very valuable.

Are there any cost advantages?

The price difference between laminates and varnishes in minimal unless you plan to invest in a large run of labels. In that case, laminates are a bit more cost effective.

Bottle labels being printed with a protective laminate.

Protect Your Custom Labels

Your label can make a good first impression, but an unwanted scuff isn’t going to do you any favors. At Blue Label, we work with you to make sure that your labels a perfect for your needs, both in terms of performance and aesthetic. Contact us today to talk to one of our experts about printing quality, eye-catching labels for your products.